VELVET EFFECT PAINT 1l
- Brands Francesco Guardi
- Product Code: VELVET EFFECT PAINT
- Available: In Stock
-
£78.00 (Inc. VAT)
- Ex VAT: £65.00
Francesco GUARDI finish paint with velvet effect is a modern paint from decorative interior products line which enables the painter to obtain colour and tactile effects similar to antique furnishing fabrics from Damascus. Such effects may be achieved using a variety of tools and application techniques to restore the residential comfort of rooms and interact with current trends in interior design.
This paint is particularly suitable for painting bedrooms, living rooms or offices.
Also remember to buy the color base necessary to achieve the effect:
TECHNICAL PARAMETERS
Application method |
brush, sponge, spatula, glove, roller, spray |
Number of coats |
1 or 2, depending on the desired effect |
Coverage |
10 – 25 m2/l |
Drying time |
12 hours |
Thinner |
water |
Cleaning tools |
water |
Colour scheme |
Pearl basis + 30 colours from Francesco GUARDI collection |
Storage |
In sealed containers at temperatures from 5°C to +25°C |
Volume |
1 l |
HOW TO USE
- SUBSTRATE PREPARATION
The substrate must be clean, dry and free from dust, grease and other substances that reduce adhesion. If the substrate is robust and compacted, just rinse with water with some detergent. Remove old, flaky paint coats. Clean and wash the substrate. In the case of substrates covered with mould or fungi, remove it and wash the surface with BIOTOX TOTAL following the manufacturer’s instructions. Before applying paint, prime the substrate with Francesco GUARDI primer.
- APPLICATION METHOD
Depending on the effect you want to obtain, paint the surface using a tool applicable for a specific finish, i.e. a brush, sponge, spatula, glove, roller or spray.
Brush:
Dilute the paint with water to 15-20%. Use a flat brush, the size depends on the effect you want to achieve. Dip the brush into the paint, remove the excess and apply directly to the surface with movements of your own discretion, i.e. to obtain the decorative effect you want to achieve.
Sponge:
Dilute the paint with 20% water, dip the sponge into the paint and then distribute on the wall using a circular movement.
Spatula:
Use a plastic spatula or trowel depending on the intended effect. Apply the product directly using a trowel or brush and then form the product using a spatula. Using a similar method, you may apply two or more colours simultaneously or in succession which allows for the achievement of an endless number of effects. Better end results can be achieved by applying two coats.
Glove:
Dilute the paint with water to 10-15%. Use a wool or synthetic glove. Distribute the paint on the wall with uniform movements. To achieve better results, apply two coats.
- ADDITIONAL INFORMATION
Apply Francesco GUARDI velvet effect paint at substrate and ambient temperatures from +5°C to +25°C, avoiding direct sunlight on painted surfaces both during application and drying.
AVAILABLE COLOURS
After making your choice, please send a message with the selected color. Choose a color from the photo.