Accelerator for Render and Paint 125ml

SPEED RENDER is a ready-to-use preparation that accelerates the setting and drying process of plasters by improving the water evaporation processes. The agent does not reduce the performance parameters and properties of plasters and paints.

APPLICATION: recommended as an additive to plasters and paints when carrying out facade works in conditions of reduced temperatures (from 0°C to +10°C) and increased air humidity (up to approximately 80%). The product causes faster evaporation of water from the material, thus shortening the initial setting time of dispersion products. Thanks to this, the applied material becomes resistant to sudden temperature drops and precipitation. The setting time of the preparation depends on the ambient temperature and humidity.

HOW TO USE The preparation should be added to plaster or paint immediately before use in an amount of 1% of the product's weight - i.e. 125 ml (entire bottle) per 25 kg of plaster or 50 ml as an addition to paint in a 10 liter package. After adding the plaster or paint, mix it thoroughly.

Recommended work temperature from +0°C to +10°C, relative air humidity up to 80%. The applied material becomes resistant to atmospheric precipitation after approximately 6÷8 hours. After min. 6 hours after applying the plaster or paint, the ambient temperature may drop to -5°C.

IMPORTANT: The application and initial setting of the material must take place at positive temperatures. When the relative air humidity exceeds 80%, the use of the product may completely stop the binding processes of plasters and paints.

Plastering compounds and paints should be applied continuously on surfaces constituting a separate whole, using material from one production batch. Do not use plaster or paint without the addition of SPEED RENDER on one surface.

• accelerates the binding process of plasters and paints
• protects the coating against low temperatures (from +0 °C)
• does not change the color of the finishing coating