Ultra Fast 70 gun foam

A new generation one-component product with accelerated curing time, developed according to modern technology, thanks to which it was possible to block the emission of harmful MDI substance during foam application.

Tytan Professional ULTRA FAST 70 gun foam is a foam with accelerated hardening time and reduced post expansion. It is recommended for a wide range of applications in construction: mounting, sealing, filling, insulation. Cures on exposure to moisture. Thanks to the modern recipe, we can achieve up to 77 liters of efficiency *. The foam is resistant to mold and fungi as well as to high and low temperatures (from -60 ° C to + 100 ° C). After curing, the foam can be cut, sanded, plastered or painted. The high-quality Tytan Professional ULTRA FAST 70 pistol mounting foam is manufactured in accordance with the ISO 9001 standard.

ADVANTAGES

• Capacity up to 77l *

• Fully cured after 1.5 h *

• Foam processing in just 10 minutes *

• Very low post-expansion

• The new valve generation - the system

• Prevents valve sticking and gas leakage

• Extended warranty period - 18 months

• No MDI emissions - greater work safety

• "Ozon-friendly" means that the product does not contain CFCs - Chloro-Fluoro-Carbon (CFC and HCFC) gases that contribute to the destruction of the ozone layer

APPLICATION

• Seals for the installation of windows and doors, window sills, roller shutters, stair steps, etc.

• Filling and soundproofing partition walls, prefabricated elements in skeletal structures

• Thermal and acoustic insulation of floors, soundproofing and sealing of partition walls, car cabins and boats

• Filling elements in skeletal structures

• Filling gaps in wall and ceiling joints as well as in confined spaces (without moisture access)

• Soundproofing and sealing of partition walls, car and boat cabins

* The parameters provided have been measured in accordance with Selena's internal standards based on FEICA standards and depend on external conditions, the quality of the equipment used and the method of proceeding in accordance with the instructions. Measurements were made at 23 ° C and 50% humidity. Maximum yield by slow foaming method measured under optimal conditions (EN 291). The end result largely depends on the amount of foam lost (over-application), can temperature, application, surface area, quality of equipment used and the skill of the person who releases the foam. 10 min of cutting time and processing after 1.5 h can be achieved in the "wet" application with water wetting the surface before application and foam immediately after application at a minimum temperature of 20 ° C.